DC Battery Life Calc Free

This is a simple tool to help calculate the estimated run-time* of your battery or battery bank under a given load. By entering the Rated Battery Capacity, measured in amp hours (symbol: Ah) and applied load i.e. Discharge Rate, measured in amperage or amps for short (symbol: A), you can calculate the Actual Battery Capacity at that load plus how much time it takes to discharge to the batteries to safe levels 25% - 50%, (green and yellow) and to the levels at which you may be damaging the battery (orange, red, deep red).

The calculator also takes into consideration PEUKERT'S Law.

If you happen to have the manufacturers Peukerts Number then you can enter it.

Otherwise it's set to 1.1

For a lead–acid battery, the value of is typically between 1.1 and 1.3.

For VRSLAB AGM batteries, it generally ranges from 1.05 to 1.15.

For GEL batteries from 1.1 to 1.25.

For Flooded batteries commonly known as sealed batteries, 1.2 to 1.6.

* Due to factors such as age, make and temperature please note that run-times are estimates.

</div> <div jsname="WJz9Hc" style="display:none">这是一个简单的工具来帮助计算给定负载下的电池或电池组的预计运行时间*。通过输入额定电池容量，测量安培小时（符号：阿）和应用负载即放电率低，在电流或安培简称（代码：A）测定，就可以计算出在该负荷电池的实际容量加上多少时间它需要放电到电池到安全水平的25％ - 50％，（绿，黄），并在其中可能会损坏电池（橙色，红色，深红色）的水平。

该计算器还考虑到PEUKERT定律。

如果你碰巧有厂商Peukerts号码，然后就可以进入了。

否则，它被设置为1.1

对于铅酸电池，该值通常为1.1和1.3之间。

为VRSLAB AGM电池，它通常为1.05至1.15。

对于胶体电池为1.1〜1.25。

对于富液电池俗称密封电池，1.2〜1.6。

*由于因素，如年龄，使和温度请注意，运行时间估计。</div> <div class="show-more-end">